TP-Link TL-SG1210P - Unmanaged Layer 2 Gigabit Desktop PoE+ Switch, Grey
Key Specifications
Choose one or multiple features to search for items that have the same specifications.| Ports & interfaces | |
| Ethernet LAN (RJ-45) ports | 9 |
| Gigabit Ethernet (copper) ports quantity | 9 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Basic switching RJ-45 Ethernet ports quantity | 9 |
| SFP module slots quantity | 1 |
| SFP+ module slots quantity | 1 |
| Weight & dimensions | |
| Height | 26 mm |
| Width | 209 mm |
| Depth | 126 mm |
| Energy management | |
| Power consumption (typical) | 7.11 W |
| Input current | 1.31 A |
| DC input voltage | 53.5 V |
| Power consumption (max) | 78.13 W |
| Power supply included | ![]() |
| Operational conditions | |
| Operating relative humidity (H-H) | 10 - 90% |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 50 °C |
| Storage relative humidity (H-H) | 5 - 90% |
| Heat dissipation | 266.42 BTU/h |
| Networking | |
| Networking standards | IEEE 802.1p, IEEE 802.3af, IEEE 802.3at, IEEE 802.3x |
| Flow control support | ![]() |
| Ethernet LAN data rates | 10/100/1000 Mbit/s |
| Auto MDI/MDI-X | ![]() |
| 10G support | ![]() |
| Copper ethernet cabling technology | 10BASE-T, 100BASE-TX, 1000BASE-T |
| Auto-negotiation | ![]() |
| MAC address auto-learning supported | ![]() |
| MAC address auto-aging supported | ![]() |
| Data transmission | |
| MAC address table | 4000 entries |
| Switching capacity | 20 Gbit/s |
| Maximum data transfer rate | 20 Gbit/s |
| Jumbo frames support | ![]() |
| Store-and-forward | ![]() |
| Forwarding rate | 14.88 Mpps |
| Jumbo frames | 16 |
| Security | |
| IGMP snooping | ![]() |
| Certificates | |
| Certification | CE, FCC, RoHS |
| Management features | |
| Switch layer | Layer 2 |
| Quality of Service (QoS) support | ![]() |
| Switch type | Unmanaged |
| Packaging content | |
| Cables included | AC |
| Manual | ![]() |
| Quick start guide | ![]() |
| User guide | ![]() |
| Optical fiber | |
| Fiber type | Single-mode |
| Fiber ethernet cabling technology | 1000BASE-X |
| Other features | |
| Dimensions (WxDxH) | 209x126x26 mm |
| Design | |
| Form factor | Desktop |
| LED indicators | ![]() |
| Wall mountable | ![]() |
| Product colour | Grey |
| Housing material | Metal |
| Power over Ethernet (PoE) | |
| Power over Ethernet (PoE) | ![]() |
| Power over Ethernet (PoE) ports quantity | 8 |
| Power over Ethernet plus (PoE+) ports quantity | 8 |
| Total Power over Ethernet (PoE) budget | 63 W |
| Power over Ethernet (PoE) power per port | 30 W |
| Performance | |
| Plug and Play | ![]() |
| Fanless | ![]() |
| Logistics data | |
| Harmonized System (HS) code | 85176990 |
| Multicast features | |
| Multicast support | ![]() |
| EAN | 6935364052980 |
| Warranty | 5 years |
This unmanaged switch expands your wired network without requiring configuration. The TP-Link TL-SG1210P 10-port Gigabit Desktop PoE+ switch is a plug-and-play device featuring 9 Gigabit Ethernet ports and 1 SFP slot. Eight PoE+ ports provide a 63 W total power budget. Power over Ethernet removes the need for separate electrical outlets for connected devices. Each PoE+ port delivers up to 30 W to power hardware such as IP cameras or wireless access points using standard networking cables. The switch uses 10/100/1000 copper connectivity for reliable data transfer.
The switch is housed in a grey metal desktop chassis measuring 209 x 126 x 26 mm. The metal casing dissipates heat without moving parts, allowing for fanless, silent operation in small offices or quiet rooms. LEDs on the front panel provide status monitoring. The unit is wall-mountable to save desk space and keep cables organised. Maximum power consumption is 78.13 W under full load. Auto-negotiation and auto-MDI/MDIX protocols detect device speeds and eliminate the need for crossover cables.
Key Features:- A 20 Gbit/s switching capacity handles simultaneous data streams.
- A 14.88 Mpps forwarding rate maintains steady packet delivery during intensive network activity.
- A 4000-entry MAC address table routes local traffic for connected devices.
- Complies with IEEE 802.3af/at standards for electrical compatibility with third-party hardware.
- Supports 16 KB jumbo frames to increase file transfer efficiency by sending larger payloads per packet.
- Layer 2 forwarding uses hardware addresses to route traffic without software overhead.
Estimated delivery: 16.06 - 18.06
Today: 10:00 - 18:00
Estimated delivery: 16.06 - 18.06
Today: 09:00 - 17:00
Estimated delivery: 16.06 - 18.06
Today: 10:00 - 17:00
Estimated delivery: 16.06 - 18.06
Today: 10:00 - 18:00
Estimated delivery: 16.06 - 18.06
Today: 10:00 - 18:00
Estimated delivery time: 16.06 - 18.06
Estimated delivery time: 16.06 - 17.06
Estimated delivery time: 17.06 - 18.06
Estimated delivery time: 17.06 - 18.06
Estimated delivery time: 17.06
Estimated delivery time: 16.06 - 18.06
Estimated delivery time: 16.06 - 18.06
Estimated delivery time: 17.06
- manual pdf (English)
- leaflet (English)


