NETGEAR ProSAFE GS752TPS 52-Port Gigabit PoE Smart Managed Switch - Kytkin - Hallinnoitu - 48 x 10/100/1000 (PoE) + 2 x combo Gigabit SFP + 4 x Gigabit SFP - rä
Produktspecifikation
Välj en eller flera funktioner för att söka efter produkter med samma specifikationer.Anslutningar | |
SFP/SFP+ ports quantity | 4 |
Antal Gigabit Ethernet (koppar)-portar | 2 |
Antal grundläggande RJ-45 Ethernet-portar | 48 |
Antal SFP-modulplatser | 4 |
Vikt & dimension | |
Vikt | 5,48 kg |
Höjd | 43 mm |
Bredd | 440 mm |
Djup | 310 mm |
Strömtillförsel | |
Strömförbrukning (vanlig) | 526,8 W |
Ingående ström | 8 A |
Växelström Frekvens | 50 - 60 hz |
AC-inspänning | 100 - 240 V |
Miljökrav | |
Intervall för relativ operativ luftfuktighet | 10 - 90% |
Temperaturintervall (förvaring) | -20 - 70 ° C |
Temperatur vid drift | 0 - 50 ° C |
Fuktighet (förvaring) | 5 - 95% |
Nätverk | |
Full duplex | |
Kommunikationsstandarder | IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z |
Portspegling | |
Datahastighet för Ethernet-LAN | 10,100,1000 Mbit/s |
Antal VLAN | 4093 |
VLAN-stöd | |
10G stöd | |
Koppar Ethernet-kablar teknik | 1000BASE-T, 1000BASE-TX, 100BASE-TX, 10BASE-T |
Dataöverföring | |
Tillgängliga dataöverföringshastigheter | 10/100/1000Mbps |
Maximal överföringshastighet | 10 Gbit/s |
Lagra-och-vidarebefordra | |
Paketbuffertminne | 2 MB |
Antal statiska rutter | 32 |
Förpackning | |
Bruksanvisning | |
Manual | |
Bevakning | |
Åtkomstkontrollista (ACL) | |
SSH / SSL-stöd | |
IGMP-snooping | |
Management features | |
MIB stödd | RFC 1213 MIB II, RFC 1643 Ethernet Interface MIB, RFC 1493 Bridge MIB |
Switch-lager | L3 |
Stöd för garanterad tjänstekvalitet (QoS) | |
Webbaserad adminstraion | |
Switch typ | hanterad |
Optisk fiber | |
Fibertyp | Enkelläge |
Övriga egenskaper | |
Latens | 20 |
Nätverksansluten (Ethernet) | |
Anslutningsteknologi | Kabel |
Bandbredd | 104 Gbit/s |
Wi-Fi | |
Strömlysdiod | |
Typ av ethernet-gränssnitt | Snabb Ethernet, Gigabit Ethernet |
Design | |
Certifiering | CE, FCC 15 A, VCCI A, EN 55022 (CISPR 22), EN 55024 (CISPR 24), C-Tick, CCC |
Rackmontering | |
Säkerhet | CE, CUL 60950/EN 60950, CB, CCC |
Formfaktor | 1U |
LED-indikatorer | LAN, PoE, Energiljus, Status |
Produktens färg | Rostfritt stål |
Staplingsbar | |
Power over Ethernet (PoE) | |
Strömförsörjning via Ethernet (PoE) stöd | |
Antal Power over Ethernet plus (PoE +)-portar | 8 |
Prestanda | |
Internminne | 128 MB |
Medeltid mellan fel (MTBF) | 206539,3 h |
Flashminne | 32 MB |
Minnestyp | DDR-SDRAM |
Firmware kan uppgraderas | |
Multicast-stöd | |
EAN | 606449084849 |
Garanti | 1 år |
Source: Icecat.biz |
Enhanced Scalability and Network Convergence for Growing Businesses.
The ProSafe Gigabit Stackable Smart Switch family is unique in delivering the scalability, reliability, and performance growing small and medium-sized businesses need in an affordable and easy-to-manage package. The NETGEAR’s Second Generation of these Stackable Smart Switches consists of 4 models in 28/52-port configuration with or without PoE option. They come with more port density and a total of 6 SFP ports for fiber connectivity. Among them, 2 are shared, and the other 4 are dedicated for either stacking or uplinks. This new generation of Stackable Smart Switches offers more flexibility and scalability that will make it easier and non-interruptive for growing businesses to expand their network capacity.
Stacking for Scalability and High Availability.
The new Generation of Stackable Smart Switches use 2 dedicated ports in the front of the switch for stacking, providing a 10Gbps, dual-ring, highly redundant stacking bus that carries intra-stack traffic and provide highest level of resilience, allowing you to stack up to six switches or up to 300 10/100/1000 Mbps ports, forming a virtual chassis for easy management under a single IP address. This stacking technology also provides several high-availability features to ensure business continuity:
- Resiliency: Due to redundant stacking port connections, there is an automatic fail-over in case any switch in the stack fails, with rapid reconfiguration, thus preventing network downtime.
- Hot-swappable: All switches in the stack are hot-swappable, and can be integrated or removed without disrupting the network.
All switches in the stack are hot-swappable, and can be integrated or removed without disrupting the network.
These Stackable Smart Switches come with a complete suite of advanced features for more robust security, higher quality of service and high availability. This switch is equipped with highly advanced features such as access control lists (ACL), static routing, rate limiting, IGMP snooping, and Dynamic VLAN assignment among others to provide a small and medium sized business with a network that is geared for growth while providing scalability and reliability.
Advanced Security.
These switches also provide advanced features that provide more robust security to SMBs.
These include:
- 802.1x for authentication.
- ACL filtering to permit or deny traffic based on MAC and/or IP addresses.
Advanced Quality of Service (QoS).
Priority queuing ensures high-priority traffic gets delivered efficiently, even during congestion from high traffic bursts. Companies implementing network telephony or video conferencing, for example, need to be able to prioritize such voice and video traffic and other real-time applications over less latency-sensitive traffic to ensure reliability and quality. The ability to prioritize traffic ensures quality of latency-sensitive services and applications despite increasing traffic loads.
Friendly to converged network with voice and video, the Stackable Smart Switches offers Auto Voice and Auto Video features that automatically configures QoS, Security and VLAN settings for IP phones and IP cameras.
IPv6 Support.
IGMP filtering and querier ensure multicast streams are only delivered to interested receivers, preventing flooding even without a dedicated multicast router. When receivers are in different VLANs, Multicast VLAN registration (MVR) uses a dedicated multicast VLAN to forward multicast streams and avoid duplication for clients in different VLANs.
Manageability and Support.
There are various easy and convenient ways to manage the Stackable Smart Switch. The new Stackable Smart Switches can be managed by the Smart Control Center software which comes free with the switch. With it, you can discover and manage all Netgear Smart Switches from a central location, conduct mass configuration and firmware upgrade. If you have other Netgear business products in your network, you can also use the NMS200, Netgear’s management platform for discovery and configuration of all your Netgear products in the network. For the peace of mind, these Stackable Smart Switches are backed by the NETGEAR ProSafe Lifetime Hardware Warranty and 1-year free 24x7 Advanced Technical Support.
Beräknad leverans: Ingen leverans information
Idag: 10:00 - 18:00
Beräknad leverans: Ingen leverans information
Idag: 09:00 - 17:00
Beräknad leverans: Ingen leverans information
Idag: Stängt
Beräknad leverans: Ingen leverans information
Idag: 10:00 - 17:00
Beräknad leverans: Ingen leverans information
Idag: 10:00 - 18:00
Beräknad leverans: Ingen leverans information
Idag: 10:00 - 17:00
Beräknad leverans: Ingen leverans information
Idag: 10:00 - 18:00
Beräknad leveranstid: Ingen leverans information
Beräknad leveranstid: Ingen leverans information
Beräknad leveranstid: Ingen leverans information
Beräknad leveranstid: Ingen leverans information
Beräknad leveranstid: Ingen leverans information
Beräknad leveranstid: Ingen leverans information