Zalman Z3 Iceberg Black ATX/Mid Tower, TG, 2 ARGB fan included
Produkten har utgått från sortimentet eller är inte tillgänglig för tillfället.
Produktspecifikation
Välj en eller flera funktioner för att söka efter produkter med samma specifikationer.Anslutningar | |
Ljudanslutning | Y |
Ljudutgång | Y |
Antal USB 2.0 anslutningar | 1 |
Antal USB 3.2 Gen 2 (3.1 Gen 2) typ C-portar | 1 |
Vikt & dimension | |
Vikt | 6,4 g |
Höjd | 480 mm |
Bredd | 210 mm |
Djup | 410 mm |
Lagringsmedia | |
Antalet hårddiskar som stöds | 4 |
Hårddiskstorlek som stöds | 2.5,3.5" |
Förpackning | |
Vikt inkl. förpackning | 7,6 g |
Låddjup | 550 mm |
Höjd | 485 mm |
Förpackningens bredd | 265 mm |
Kylning | |
Frontfläktar installerade | 1x 120 mm |
Maximal främre fläktar | 3 |
Frontfläktdiametrar som stöds | 120,140 mm |
Bakre fläktdiametrar som stöds | 120 mm |
Toppfläktdiametrar som stöds | 120,140 mm |
Antal bakfläktar som stöds (max) | 1 |
Antal toppfläktar som stöds (max) | 2 |
Bakre fläktar installerade | 1x 120 mm |
Storlek som stöds för bakre radiator | 120 mm |
Storlek som stöds för främre radiator | 120,240,280,360 mm |
Storlek som stöds för övre radiator | 120,240 mm |
Design | |
Modell | PC |
Formfaktor | Midi Tower |
Material | Plast, Stål, Härdat glas |
Produktens färg | Black |
Belysning | ![]() |
Återställningsknapp | ![]() |
Som stöds moderkorts formfaktorer | ATX, EATX, micro ATX, Mini-ITX |
Anti-dammfilter | ![]() |
Antal 3,5 "vikar | 2 |
Sidoruta | ![]() |
Maximal CPU-kylarhöjd | 16,3 cm |
Maximal grafikkortslängd | 31,5 cm |
Maximal PSU-längd | 21 cm |
Antal 2,5 "vikar | 4 |
Strömförsörjning | |
Strömförsörjning plats | Botten |
Strömförsörjning ingår | ![]() |
EAN | 8809213766299 |
Garanti | 1 år |
Source: Icecat.biz |
Zalman Z3 Iceberg Black
ATX Middle tower computer case black
Minimalistic Design
A minimalistic design inspired by a glacier and its minimal lines
Aesthetic and Functional
Elegant front design inspired by the glacier ensures a smooth airflow as well as aesthetic
Maximum Airflow and Ventilation
2 pre-installed 120mm ARGB fans (Front x 1, Rear x 1) and optimized ventilation provide quick heat dissipation from the case (Up to 8 fans can be supported)
Supports Addressable RGB
※ How to control RGB LED
- LED colors & patterns can be changed by pressing the LED Button on I/O ports.
- Long pressing on the LED Button for 6 seconds, RGB LED will be turn off after blinking twice in white.
- Long pressing on the LED Button for 3 seconds, RGB will be synchronized with motherboard after blinking once in white.
- Press the LED Button again to desynchronize with motherboard.
Fan Specifications (Addressable RGB LED Fan)
• Dimensions : 120 x 120 x 25(T)mm
• Bearing Type : Hydro Bearing
• Max Fan Speed : 1,200 RPM ±10%
• Max Airflow : 37.8 CFM
• Air Pressure : 0.7mm H2O
• Noise Level : 26.4 dB(A)
• Life Span : 40,000 hours
Easy-to-use Slide Glass Side Panel & Tempered Glass
A thick 4mm tempered glass panel allows for easy viewing of the internal computer components.
The tempered glass side panel is protected utilizing an edge guard ensures the tempered glass panel will not slide out of proper placement during installation and removal. This edge guard protects the glass and makes it relatively vulnerable to impact and allows for access with removal of only 2 hand tightened screws.
Easy accessible design on top I/O ports
Z3 ICEBERG comes with two USB3.0 ports and its I/O port is placed on the right side of the chassis to provide great experience on cable management.
Power Button(LED), Reset Button, LED Control Button, Headphone Jack, Microphone Jack, USB2.0 Port, USB3.0 Ports
Cable-Management-Friendly Chassis
Carefully designed chassis to minimize cable management difficulties
* Upper I/O port is on the right side with rubber covers applied to unused holes for cable management
Top Magnetic Dust Filter
Protects your components and provides unobstructed airflow through dust filtration
Bottom Dust Filter
Protects your power supply from piling up dust
Fan Support
Front : 3 x 120mm / 3 x 140mm
Top : 2 x 120mm / 2 x 140mm
Rear : 1 x 120mm
Bottom : 2 x 120mm
Radiator Configuration
Front : 120mm / 240mm / 280mm / 360mm
Top : 120mm / 240mm
Rear : 120mm
Specifications
Model: Z3 Iceberg Black
Materials: Steel, Plastic, Tempered Glass
Weight: 6.4kg
Dimensions: 410(D) x 210(W) x 480(H)mm
Case Form Factor: ATX Mid-Tower
Motherboard Support: E-ATX (~280mm), ATX, mATX, Mini-ITX
Fans Support: Front 3 x 120mm / 3 x 140mm, Top 2 x 120mm / 2 x 140mm, Rear 1 x 120mm
Fan(s) Included: Front 1 x 120mm (Addressable RGB), Rear 1 x 120mm (Addressable RGB) ARGB Controller Included
Drive Bays: 2 x 3.5” (2 x Combo, 1 x Toolless), 4 x 2.5”
Radiator Support: Front 120mm / 240mm / 280mm / 360mm, Top 120mm / 240mm, Rear 120mm
Max. VGA Length: 315mm
Max. CPU Cooler Height: 163mm
Max. PSU Length: 210mm
PCI Expansion Slots: 7
I/O Ports: 1 x Headphone, 1 x Mic, 1 x USB 2.0, 2 x USB 3.0, Power Button, Reset Button, LED Button
Product code: Z3 Iceberg Black
Beräknad leverans: Ingen leverans information
Idag: 10:00 - 18:00
Beräknad leverans: Ingen leverans information
Idag: 09:00 - 17:00
Beräknad leverans: Ingen leverans information
Idag: 10:00 - 17:00
Beräknad leverans: Ingen leverans information
Idag: 10:00 - 18:00
Beräknad leverans: Ingen leverans information
Idag: 10:00 - 17:00